Custom cold plunge builds

Cold plunge clad on site in veined marble

Marble, clad on site

This cold plunge is finished in the same veined marble as the bathroom it stands in. The vent opens through a black mesh panel set into the stone.

Hardwood cold plunge tapered to fit the corner of a tiled wet room

Hardwood, shaped for a corner

The hardwood deck and frame narrow toward one end, so the cold plunge closes into the corner of a tiled wet room. The tub is stainless steel.

Set into concrete

The tub is square and rimmed in hardwood, and it sits in a raised concrete surround outdoors.

Wenge

Wenge boards run the length of the frame, and the vent screen at the end is stainless.

Customized or fully custom?

Made entirely in-house in the USA, we keep complete control over every detail. The difference between the two paths is whether you are specifying design alterations to an existing model, or envisioning something that has never been built before.

What can be customized on a custom cold plunge tub

Size, shape and depth

We draw the tub for the space it goes into. Tubs have gone out 26, 27 and 30 inches wide, where a standard Modular tub is 24. One was built deep enough to stand in, and it has a seat, a step and handrails in the tub.

Tub material

Our standard is a tub of 316 stainless steel, 14-gauge. A custom can use carbon fiber, HempCarbon or gel-coated fiberglass instead, and stainless can be powder-coated in a color.

Exterior finish

The frame is finished in Line-X in black, white, grey or beige, or in a Sherwin-Williams color of your choosing. Hardwood decks are Black Walnut, Mahogany or White Maple.

Cladding done on site

When the finish is stone, tile or a wood of your own, we leave the exterior bare and prep it. Your installer clads it after it is set. Past builds have gone out prepped for marble, for stone and for tile.

Equipment apart from the tub

The chiller, pumps and filtration can live in their own box, as far as 25 feet away, and the plumbing can run through a wall if the room calls for it. The box needs 18 inches clear at its vents. The tub frame needs no clearance.

Logos, screens and drains

A logo can be engraved into the build, and stainless steel decals are an option. Vent screens can be powder-coated in a color. Some custom tubs have a pop-up drain that is hard plumbed.

IMG 8878 preview scaled

Built-in cold plunges

A built-in cold plunge is made for one place, such as a deck or the corner of a wet room. We build the tub and frame to fit and leave the exterior ready for the finish around it.

The photo is from downtown Austin: two stainless steel tubs at the RSR 700 River Apartments, in surrounds that we clad in cumaru in our shop. With the equipment in its own box up to 25 feet away, the noise and heat of the chiller stay away from the tub.

In-ground cold plunges

For an in-ground, flush-mount or deck-level cold plunge, we build the tub and the equipment and your builder sets it. The chiller, pumps and filtration go in their own box, placed as far as 25 feet from the tub. A plumber or general contractor runs the plumbing between the two on site, in schedule 40 PVC, fully insulated. That plumbing is not part of what we ship.

Tell an advisor the dimensions, the depth and how you want to get in and out. We confirm it can be built before anything is priced.

Custom cold plunge questions

Tell us what you’re building.

Send the space, the use case and the timeline — an advisor comes back with feasibility and a quote.