In-Line 60 Cold Plunge Tub

36°F 

Water temperatures can run between 36°- 60°F.

The same drop of water doesn't touch you twice without recirculating. It feels like a winter stream. Your body temperature has zero effect on the water. 

As of right now, ice bath means cold water immersion with or without ice that is less than 40°F. It is the popular term used to indicate extreme cold immersion experience. 

There are many terms currently used to describe cold immersion therapy:

Ice bath, cold plunge, cold tub, cold spa take your pick.  

Cold immersion therapy = less than 60°F

BlueCube's temperature can modulate within this range to meet your needs. 

We designed our BlueCube ice baths to be reliable with simple maintenance.

Highest quality industry standard parts. Easy filter replacement.

If any issues arise, you can contact us directly for troubleshooting by video.

If the issue persists, we will send out BlueCube certified technician to handle the troubleshooting.

Most issues can be handled directly by video chat. In the case that we do send out technicians, we have a response time between 2-4 weeks.

For daily personal use , replace filters once per month. 

For commercial use, ~100 daily plunges, replace filters 2-3 times per week.

For all wood / wooden deck In-Lines, wood needs to be rubbed with teak or tung oil every month / every six months depending on climate.

For your warranty to be honored, YOU MUST adhere to this schedule with photo /video documentation.

If you adhere to this schedule, not only do you have a five your warranty—there is no reason why this can't last 10+ years. 

In addition, changing filters and water based on your use to ensure longevity of components. 

If you are placing your cold plunge outside, then we strongly recommend buying a Linex exterior finish (CoreChill Edition).

This is the only exterior that we will offer a warranty if placed outside.

If you buy an all wood In-Line 60 and place it outside, then IT MUST BE IN THE SHADE!

Direct sunlight damages all products, all surfaces and materials.

If you place the all wood In-Line 60 outside, then we cannot honor the warranty on the exterior frame.

THE CUSTOMER ACKNOWLEDGES THAT NO REFUND OR RETURN IS OFFERED ON CUSTOM BLUECUBE In-Lines.

There are no refunds on custom BlueCube In-Line 60s.

We take great pride in our work. We will repair or replace any units that are not functioning properly.

FOR STANDARD BLUECUBES AND CORECHILLS THERE IS A 25% RESTOCKING FEE IF YOUR ORDER IS CANCELED. AFTER RECEIVING A STANDARD BLUECUBE OR CORECHILL, YOU HAVE 30 DAYS FOR A REFUND, NET 25% RESTOCKING FEE + SHIPPING EXPENSES. BY PURCHASING, YOU ARE AGREEING TO THIS.

Your BlueCube Ice Bath is constantly filtering the water through a 20-micron filter, the type often used to purify drinking water, and O3 (ozone) technology. O3 is a powerful and natural disinfectant and oxidizer. Together, the filter and O3 system keep your BlueCube water fresh and clean, without using chemicals.

Your BlueCube cold plunge comes raised and with a bottom drain. 

You can drain the entire ice bath in 15 minutes. Bottom drain attaches to a garden hose for easy out. 

Just refill it (~15 min depending on water pressure) and give it time to reach the desired temperature setting, and you're good to go!

BlueCube Inline 60 Ice Bath Frame:

LWH: Length, Width, Height

(LWH) 95" x 39" x 28" inches

Length = 95" inches

Width   = 39" inches

Height  = 29" inches

Without water, the unit weighs about ~450-550 lbs

The BlueCube plugs into a standard 120 V outlet and uses 20 amps regular power use.

Your In-Line 60 will require a dedicated 20 AMP GFCI Outlet.

It works hard bringing down the water temperature, but is extremely efficient at keeping that temperature.

On low gear (continous filtration and chilling), AMP draw is between 8 to 9 amps.

The water cools at 11°- 13°F degrees per hour. It can then run steady at that temperature 24/7, making it convenient to cold plunge at any time.